:: RexCon - Mobile 12SE Batch Plant ::

The Mobile 12SE is an "on-site" portable batch plant which can be hydraulically erected by one person in 22 minutes, without a crane. Its low profile enables ramping up directly to the material bins with a front end loader, while still providing 14' loading height clearance on the discharge end.

No steel pads required as the Mobile 12SE stout structure run the entire length of the frame on both sides and sits directly on the ground. Multiple material storage designs and central mix capabilities make the Mobile 12SE the most versatile and portable batch plant on the market.

For more information on the Mobile 12SE, see Batch Plant Accessories, or contact your RexCon sales support staff.

Mobile 12SE Specs:

Aggregate Section: Two (2) CPMB rated Decumulative batchers, 11.5 cu. yd. / 8.25 cu. m. and 10 cu. yd./ 7.5 cu. m., with four (4) each 20,000 lb. compression load cells.
Batch Belt Conveyor: 36" wide 3-ply belt with vulcanized splice and 40 HP drive. Belt operates at 450 FPM.
Cement Section: Two (2) each 150 bbl. (28 ton) compartments with 5" fill pipes. Two (2) 12" dia' screw augers powered by 40 HP direct drives. Includes adjustable jam gates for maintenance and sealed hatched for inspection and individual high and low bin signals.
Cement Batcher: Oversized 12 cu. yd. / 9.2 cu. m. (CPMB rated) cement batcher with 10,000 compression load cells and weighs accumulatively.
High Pressure Air System: 20 HP air compressor with 120 gallon tank. All batcher gates are controlled by double solenoids mounted in an enclosed air panel.
Low Pressure Air System: 3 HP Roots type blower to individually restricted and factory installed bin flow pads.
Water System: Badger Turbo 3" Meter with Y-strainer and 3" piping to discharge chute.
Transportation Gear: King pin, spring suspension, dual axles, radial tires, brakes and signal lights.
Power Panel: NEMA 12 dust tight steel enclosure with single lockable main disconnect switch. Across the line starters are provided for all factory installed motors with adjustable heaters and breakers. All wiring is plug and cord.
Controls: Manual RexCon 5000 push button controls for two cements, three aggregates, water preset controlling Badger meter. Stop/start control push buttons are provided for all factory installed motors. Two (2) cement bin high level indicator lights. Plug and cord wiring with 115 volts from control to junction boxes and devices.

Mobile 12SE Options:

Three (3) Decumulative Batchers
100 Ton, Three (3) Compartment Aggregate Bin for Accumulative Weighing
RC3 Computer Control System
Individual Dust Collectors for Cement Bin and Batcher
RA140 Mobile Central Dust Collector
Office Control Container
12 Yard, Stationary or Portable Mixer
High Performance Mixing Package
Central Mixer conversion package including:
500 Gallon Batcher Water Holding Reservoir
Additional 3" Badger Temper Water Meter
Tilt Mixer Charging Chute with AR Liners
48" High Production Batch Belt
Pan Mixer 2-5 Cubic Yards
Conduit Wiring
Central Lubrication System
Hydraulic Self-Erect System - Includes a power pack, four (4) landing leg cylinders, two (2) main silo cylinders and two (2) front leg cylinders. Power pack includes a 5 HP Honda Engine and 20 gallon reservoir. The landing legs are controlled by individual manual valves. Silo and leg cylinders are controlled by a pendant control on a 30' cord.

Mobile 12SE Features:

All hydraulic plant erection. Powered by 5 HP remote cable hydraulic pack, Mobile 12SE can be taken off truck hitch and raised to operational position in 20 minutes.
One Piece Modular Low Profile Batch Plant. 12'7" height to aggregate section enables direct ramping with front end loader.
No steel pads. Main structure extends entire length of frame on both sides eliminating your need for steel pads with most ground conditions.
Loading height. 14' clearance (to steel) for loading front and rear discharge trucks.
Aggregate section. Flexible design allows for two (2) or optional three (3) materials, with additional overhead storage available.
Cement screws. 12" dia. screws with 40 HP drives provides ample cement. Adjustable jam gates assures easy maintenance.
Mix designs. Tilt mixer, twin shaft mixer or pan mixer can be easily installed depending on your job requirements.
Batch belt. High speed 36" wide (std.) and 48" wide (opt.) batch belts maximize your production.