:: RexCon - Mobile 12SE-CM Batch Plant ::

Mobile 12SE-CM central mix batch plant provides portability, high prouction and central mix. With one additional load, the Mobile 12SE-CM can be equipped with a stationary 12 yard portable tilt.

For more information on the Mobile 12SE-CM, see Batch Plant Accessories, or contact your RexCon sales support staff.

Mobile 12SE-CM Specs:

Aggregate Section: Three (3) CPMB rated Decumulative batchers, two (2) each 6 cu. yd. / 4.5 cu. m, and one (1) each 9 cu. yd. / 6.75 cu. m, with four (4) eac 20,000 lb. compression load cells.
Batch Belt Conveyor: 36" wide 3-ply belt with vulcanized splice and 40 HP drive. Belt operates at 450 FPM.
Cement Section: Two (2) each 150 bbl. (28 ton) compartments with 5" fill pipes. Two (2) 12" dia' screw augers powered by 40 HP direct drives. Includes adjustable jam gates for maintenance and sealed hatched for inspection and individual high and low bin signals.
Cement Batcher: Oversized 12 cu. yd. / 9.2 cu. m. (CPMB rated) cement batcher with 10,000 compression load cells and weighs accumulatively.
Central Mixer conversion package including:
500 Gallon Batcher Water Holding Reservoir
Additional 3" Badger Temper Water Meter
Tilt Mixer Charging Chute with AR Liners.
12 yard stationary or portable tilt mixer.
High Pressure Air System: 20 HP air compressor with 120 gallon tank. All batcher gates are controlled by double solenoids mounted in an enclosed air panel.
Low Pressure Air System: 3 HP Roots type blower to individually restricted and factory installed bin flow pads.
Water System: Badger Turbo 3" Meter with Y-strainer and 3" piping to discharge chute.
Transportation Gear: King pin, spring suspension, dual axles, radial tires, brakes and signal lights.
Power Panel: NEMA 12 dust tight steel enclosure with single lockable main disconnect switch. Across the line starters are provided for all factory installed motors with adjustable heaters and breakers. All wiring is plug and cord.
Controls: Manual RexCon 5000 push button controls for two cements, three aggregates, water preset controlling Badger meter. Stop/start control push buttons are provided for all factory installed motors. Two (2) cement bin high level indicator lights. Plug and cord wiring with 115 volts from control to junction boxes and devices.

Mobile 12SE-CM Options:

100 Ton, Three (3) Compartment Aggregate Bin, with single 12 cu. yd.Â (CPMB rated) batcher for accumulative weighing.
RC3 Computer Control System
Individual Dust Collectors for Cement Bin and Batcher
RA140 Mobile Central Dust Collector
Office Control Container
High Performance Mixing Package
48" High Production Batch Belt
Pan Mixer 2-5 Cubic Yards
Conduit Wiring
Central Lubrication System
Hydraulic Self-Erect System - Includes a power pack, four (4) landing leg cylinders, two (2) main silo cylinders and two (2) front leg cylinders. Power pack includes a 5 HP Honda Engine and 20 gallon reservoir. The landing legs are controlled by individual manual valves. Silo and leg cylinders are controlled by a pendant control on a 30' cord.

Mobile 12SE-CM Features:

All hydraulic plant erection. Powered by 5 HP remote cable hydraulic pack, Mobile 12SE-CM can be taken off truck hitch and raised to operational position in 20 minutes.
One Piece Modular Low Profile Batch Plant. 12'7" height to aggregate section enables direct ramping with front end loader.
No steel pads. Main structure extends entire length of frame on both sides eliminating your need for steel pads with most ground conditions.
Aggregate section. Flexible design allows for two (2) or optional three (3) materials, with additional overhead storage available.
Cement screws. 12" dia. screws with 40 HP drives provides ample cement. Adjustable jam gates assures easy maintenance.
Mix designs. Tilt mixer, twin shaft mixer or pan mixer can be easily installed depending on your job requirements.
Batch belt. High speed 36" wide (std.) and 48" wide (opt.) batch belts maximize your production.